Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
CTT-300 Torque Tester | Alluris by Muser
Previous | 1 / 3 | Next |
Alluris CTT-300 Torque Tester
Features
- Automatic detection of two peak values >> for torque testing of caps with lock ring.
- Limit value monitoring >> with pass /fail detection for both peak values.
- Internal memory >> for the evaluation of test series.
- Exchangeable centering base plate >> robust, stable and protected against dripping water (IP42).
Description
Digital Cap Torque Tester CTT-300 series with automatic detection of two peak values are designed for quick, manual torque testing of tamper evident closures. The cap is opened manually and the maximum torque for loosening the cap and for breaking the safety ring are detected separately. For both peaks limit values can be defined, which are monitored and displayed during the measurement.
The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.
The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the instrument is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.
The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.
The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the instrument is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.
Technical Specifications
Order No. | ||||
CTT-300B2 | CTT-300B5 | CTT-300C1 | ||
Measuring range | M(n) | 0-2 Nm | 0-5 Nm | 0-10 Nm |
Resolution | Res(n) | 0.002 Nm | 0.005 Nm | 0.01 Nm |
Accuracy | @ 23 °C (F.S.) | +/- 0.5 % (+/- 1 digit) | ||
Tk [offset] | Automatic taring (Auto-Tara) | |||
Tk [relative (F.S.)] | +/- 0.02 %/K | |||
Measuring principle | Bidirectional strain gauge with high-speed μ-Prozessor | |||
Operation modes | Standard | Real time value | ||
Peak | Torque peak (drag indicator function) | |||
Double Peak | Two consecutive torque peak values ( drag indicator function ) | |||
Limit values | 2 separately selectable limit values for both peaks (each with upper/lower limit) | |||
Overload | Max. admissible | ± 20 Nm | ||
Max. display range | 120 % (max. Tara 20 % of M(n)) | |||
Display | Type | LCD, 5-digit, 29 mm high | Status-LED switching between red/green | ||
Interfaces | USB | USB 2.0 data communication and power supply | ||
Hirose | Limits/switch signals, digital I/Os, trigger, power supply for external devices (requires optional cable) | |||
Software | FMI-Analyze | Data analysis on PC | ||
COM-Bridge | Data transmission (e. g. to CAQ-Software) | |||
Memory | Single values | Up to 1000 measuring values | Statistic function | ||
Power supply | Internal solar-cell with storage capacitor | via USB | |||
Temperature range | Operation | 0…40 ˚C | ||
Housing |
Weight | ca. 5000 g | ||
LxWxH | 280x170x95.3 mm | |||
Fixation |
On tabletops up to 30 mm depth (two holes with threaded bolts and lock nuts on the bottom) |
|||
Max. clamping range | Ø 25 - 180 mm | |||
Protection code | (without cable) | IP42 (Protection against dripping water up to 15° tilt devices) |
Downloads